Average Jantri rate for residential NA land in Hirapur area
₹151 per sq ft
₹1,620 per sq m · ₹1,355 per sq yd
- Range by zone
- ₹141–₹151
- Zones
- 5
- Applicable from
- 15 Apr 2023
Hirapur Jantri rate per sq ft by property type
Village house (gamtal)
₹93 per sq ft
₹1,000 per sq m
1 zone
NA plot, residential use
₹151 per sq ft
₹1,620 per sq m₹1,355 per sq yd
Range by zone ₹141–₹151
Shops
₹167 per sq ft
₹1,800 per sq m
1 zone
NA plot, commercial use
₹175 per sq ft
₹1,880 per sq m
Range by zone ₹165–₹175
Industrial (open plot)
₹163 per sq ft
₹1,756 per sq m
Range by zone ₹154–₹163
NA plot rate, residential use rates in the Hirapur locality range from ₹141 to ₹151 per sq ft (₹1,520 to ₹1,620 per sq m), depending on the zone. The highest is zone NA/36; the lowest is zone NA/38.
Zone wise Jantri rate in Hirapur area
4 zones here are NA (non-agricultural) village land. These are plot rates, not flat rates. The NA plot (residential) column is the rate for residential use. Commercial use has its own column.
Jantri for Hirapur area has 5 zones, and each zone covers a set of survey numbers. Your survey number is on your 7/12 extract (7/12 utara). Type that number in the box below, including any sub-division, because 21/1 and 21/2 can be different plots.
If your house is inside the old village settlement (gamtal), use the gamtal row.
Rows marked NA/… are for village land converted to non-agricultural (NA) use. Your 7/12 extract shows whether your land is NA.
Still not sure? The Sanand Sub-Registrar office can confirm which zone it will use for your property. Our guide on finding Jantri rate by survey number shows how to match your documents to a zone. If you think the value is too high, you can ask for it to be fixed under section 31 of the Gujarat Stamp Act before you register. If the deed is later sent to the Deputy Collector (Stamp Duty Valuation) under section 32A, you can appeal the order under section 32B.
No zone here lists that number. Check it against your 7/12 extract. Not every plot is printed in the schedule, so the Sub-Registrar office can tell you the zone for a missing one.
| Zone | Survey numbers covered | Flat₹/sq m | NA plot (residential)₹/sq m | Shop₹/sq m | NA plot (commercial)₹/sq m | Industrial (open plot)₹/sq m |
|---|---|---|---|---|---|---|
| Gamtal | Village settlement (gamtal) | 1,000 | — | 1,800 | — | — |
| NA/36 | Survey nos. 132, 136, 140, 141, 148, 574, 575, 578 | — | 1,620 | — | 1,880 | 1,756 |
| NA/37 | Survey nos. 273/k | — | 1,620 | — | 1,880 | 1,756 |
| NA/38 | Survey nos. 528 | — | 1,520 | — | 1,780 | 1,656 |
| NA/39 | Survey nos. 135, 138, 139, 144, 149, 448–459, 473, 570–573, 576, 577 | — | 1,620 | — | 1,880 | 1,756 |
— means the schedule publishes no rate for that zone.
Old and current Jantri rates
| Property type | 2011 rate₹ per sq m | Current rate₹ per sq m | Current rate₹ per sq ft |
|---|---|---|---|
| Flat | 500 | 1,000 | 93 |
| Shop | 900 | 1,800 | 167 |
| NA plot (commercial) | 940 | 1,880 | 175 |
| Industrial (open plot) | 878 | 1,756 | 163 |
Figures are average (median) rates across this area's zones. A draft of new Jantri rates came out on 20 November 2024, but it has not come into effect yet, so the current rates above still apply.
Stamp duty and registration charges for a NA plot
In Gujarat you pay 4.9% stamp duty and a 1% registration fee on your agreed price or Jantri value, whichever is higher. Here is the minimum for a 200 sq yd NA plot at this area's average NA plot rate.
- Jantri value
- ₹2.71 lakh
- 200 sq yd × ₹1,355 per sq yd
- Stamp duty (4.9%)
- ₹13,274
- 3.5% duty + 40% surcharge
- Registration fee (1%)
- ₹2,709
- On the same value
- Minimum you pay
- ₹15,983
- If your price is higher, you pay more
- This uses the residential NA plot rate. A house on the plot is valued separately.
If your agreed price is more than ₹2.71 lakh, use the stamp duty calculator for Hirapur area to see what you will pay on your actual price.
Hirapur Jantri rate FAQs
What is Jantri rate in Hirapur per sq ft?
About ₹151 per sq ft (₹1,620 per sq m) for residential NA land in Hirapur on average. Zone rates run from ₹141 to ₹151 per sq ft, so use the rate for your own zone.
Are the NA land rates in Hirapur the same as flat rates?
No. The NA/… rows are village land converted to non-agricultural use, valued per sq m of plot. Residential-use NA land averages ₹1,620 per sq m and commercial-use ₹1,880. A house built on the plot is valued separately; the Sub-Registrar office can tell you how.
What is the gamtal Jantri rate in Hirapur?
₹1,000 per sq m, about ₹93 per sq ft. Houses inside the old village settlement use this row. Land on survey numbers outside it uses the other zones.
How do I find Jantri for my survey number in Hirapur?
Type the number in the box above the zone table, sub-division included (for example 21/1). It is on your 7/12 extract. If it isn't printed, ask the Sanand Sub-Registrar office which zone applies.
Which part of Hirapur has the highest Jantri rate?
Zone NA/36 at ₹1,620 per sq m (about ₹151 per sq ft). The lowest is zone NA/38 at ₹1,520 per sq m.
Is stamp duty in Hirapur charged on Jantri rate or my agreement price?
On your agreement price, unless Jantri value is higher. A 200 sq yd NA plot at Hirapur's average NA plot rate has a Jantri value of about ₹2.71 lakh. If you pay more than that, duty is on your price.
Jantri rates in other Sanand taluka areas
Sanand
Sanand · NA plot ₹101/sq ft, 33% lower than Hirapur
Shela
Sanand · NA plot ₹381/sq ft, 153% higher than Hirapur
Bol
Sanand · NA plot ₹150/sq ft, about the same
Kaneti
Sanand · NA plot ₹166/sq ft, 10% higher than Hirapur
Kundal
Sanand · NA plot ₹149/sq ft, similar rate
Khoda
Sanand · NA plot ₹172/sq ft, 14% higher than Hirapur
See all 273 areas on the Ahmedabad Jantri rate page, or compare Hirapur with another area side by side.
Source: Annual Statement of Rates (Jantri) for Ahmedabad, Government of Gujarat. garvi.gujarat.gov.in